Engine & Gearbox mounts.
Page 1 of 1
Engine & Gearbox mounts.
by ldv.tek Wed Sep 17, 2014 9:47 am
Hello to all,
I am looking to rpelace my engine mounts.
Have measured the front engine mounts on the vehicle and they appear to be approx 50-55mm thick.
Rear transmission mount also appears to be 50mm thick.
I have found some Ford engine mounts that are 50mm thick, 75mm diameter that are a good price.
Questions.
1 - Has the drivers side engine mount got offset bolts?
2 - Has fitted cheap alternative heavy duty engine mounts?
3 - Anyone have an accurate measurement of the rear transmission mount as its hard to measure on the vehicle?
4 - Last but not least, any other comments welcome
I am looking to rpelace my engine mounts.
Have measured the front engine mounts on the vehicle and they appear to be approx 50-55mm thick.
Rear transmission mount also appears to be 50mm thick.
I have found some Ford engine mounts that are 50mm thick, 75mm diameter that are a good price.
Questions.
1 - Has the drivers side engine mount got offset bolts?
2 - Has fitted cheap alternative heavy duty engine mounts?
3 - Anyone have an accurate measurement of the rear transmission mount as its hard to measure on the vehicle?
4 - Last but not least, any other comments welcome
ldv.tek- Chatterbox
- Posts : 61
Join date : 2014-01-18
Similar topics» Compatability between 1.3 efi engine 2000 model and a doner 2004 engine.
» Gearbox options HC-E engine???
» Help,tips for take off,removal engine with sepatation from gearbox
» Body to Engine/Gearbox earth strap
» Gearbox mount?
» Gearbox options HC-E engine???
» Help,tips for take off,removal engine with sepatation from gearbox
» Body to Engine/Gearbox earth strap
» Gearbox mount?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|