Micro Van Owners Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

New member 1.3 vs 1.0

4 posters

Go down

New member 1.3 vs 1.0 Empty New member 1.3 vs 1.0

Post by richardsoniscool Mon Oct 11, 2010 10:04 pm

Pants! iv put his in the wrong section! could admin please move thx.

Hi, im a new member im yet to get myself a Hijet but im on the search. Me and my Girlfriend would ike it for weekends camping ( we don't need alot of room) and as a general runabout, so im looking at the MPV version as it seems to be the most versatile. There are a couple on ebay at the minute, one is a 1.3 with 80k on the clock but is a bit scruffy, the other is a 1.0 with only 34k but has an overheating problem. im unsure of which to go for as im a competent home mechanic so the overeating doesn't worry me but the 1.0 engine might be a little too sluggish for me. Has anyone compared the two?

here are the links for the ones on ebay. cheers. Mike

1.3 - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250706844165&ssPageName=STRK:MEWAX:IT#ht_500wt_949

1.0 - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=320598911355&ssPageName=STRK:MEWAX:IT#ht_500wt_949http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=320598911355&ssPageName=STRK:MEWAX:IT#ht_500wt_949

richardsoniscool
New Member
New Member

Posts : 3
Join date : 2010-10-11

Back to top Go down

New member 1.3 vs 1.0 Empty Re: New member 1.3 vs 1.0

Post by rich the mechanic Tue Oct 12, 2010 9:42 pm

Hi welcome, we were looking at the 1.3 but it was too far for us it would have been a up grade to as we have the 1.0 at the mo and the other one was to far away with a problem that may or may not be straight forward as the question is why has it got a air lock if it were round the corner it would have been a different matter.
rich the mechanic
rich the mechanic
Jet Addict

Posts : 1824
Join date : 2010-01-03
Age : 44
Location : Essex

http://www.thread-bare.biz

Back to top Go down

New member 1.3 vs 1.0 Empty Re: New member 1.3 vs 1.0

Post by difflock123 Wed Oct 13, 2010 7:15 pm

At the end of the day, the hijet isnt a very powerful vehicle in either engine...

the 1.3 I think produces around 60hp
the 1.0L is around 48hp.

But they have the advantage, that they are fairly light...

I have a 1.0L and its great Smile
It will do ~80mph on the flat if you push it.

But a month or 2 ago, I had 12 bags of sand (25kg each) and 4 bags of cement (also 25kg each), so 400kg in it.
And it still pulled to 60mph with ease, and even on a long hill out of a 30mph village, it accelerated to 55mph easily...

I havent been in a 1.3 but I reckon it would be nippier, but the 1.0L has a 3 cylinder engine, so its surprisingly grunty Smile

Economy, I heard the 1.3 is a little better, but I get 30~35mpg from my 1.0L, and I thrash it to be perfectly honest Razz

Either way though, enjoy it Smile

difflock123
Centurion

Posts : 301
Join date : 2010-06-11

Back to top Go down

New member 1.3 vs 1.0 Empty i got it :P

Post by richardsoniscool Wed Oct 13, 2010 8:24 pm

hey, thanks for the replies, i bid on the 1.3 silver one and got outbid by 20 quid >( but i won the 1.0 blue one which im happy about. its done really low miles and i hope the overheating wont be too hard to fix ill justtake some tool a new rad cap and lots of coolant with me.

and it only gonna cost me £35 to get from Suffolk to Bristol on the train Razz

expect a build, project, modding type thread up here very soon.

Mike

richardsoniscool
New Member
New Member

Posts : 3
Join date : 2010-10-11

Back to top Go down

New member 1.3 vs 1.0 Empty Over-heating

Post by emmabskin Thu Oct 14, 2010 10:05 am

Beware of underestimating the dreaded over-heating in Hi-jets. affraid Twisted Evil
It might be worth checking out how to bleed the system before you go.http://wp.me/pVul6-1D
Cheers Emma
emmabskin
emmabskin
Chatterbox

Posts : 87
Join date : 2010-06-07
Age : 62
Location : Somerset

http://daihatsuhijet.wordpress.com

Back to top Go down

New member 1.3 vs 1.0 Empty Phone number

Post by emmabskin Thu Oct 14, 2010 10:13 am

Tony says if you get stuck near Bath you can always call us we've got plenty of spares.
07599056555
emmabskin
emmabskin
Chatterbox

Posts : 87
Join date : 2010-06-07
Age : 62
Location : Somerset

http://daihatsuhijet.wordpress.com

Back to top Go down

New member 1.3 vs 1.0 Empty Re: New member 1.3 vs 1.0

Post by difflock123 Thu Oct 14, 2010 7:13 pm

Mine overheated when I got it (well it started too Razz)

I kept topping the coolant up, but got fed up.

So I got a pot of K Seal, and poured it into the radiator.

That was a while ago now Smile
No problems since...

I highly recommend K Seal to anyone. Its the only fix that actually seems to work, and not make matters worse...

difflock123
Centurion

Posts : 301
Join date : 2010-06-11

Back to top Go down

New member 1.3 vs 1.0 Empty Re: New member 1.3 vs 1.0

Post by richardsoniscool Fri Oct 15, 2010 2:18 pm

Thanks for the number I will keep it to hand, I plan to run the engine up and remove the heater bleed cap to let air escape ill take a new rad cap also and hopfully it will be ok. Anything else I should check ? Or take with me? thanks alot. Mike

richardsoniscool
New Member
New Member

Posts : 3
Join date : 2010-10-11

Back to top Go down

New member 1.3 vs 1.0 Empty Re: New member 1.3 vs 1.0

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum