Engine model
5 posters
Page 1 of 1
Engine model
Hoping someone can help me with a seemingly dumb question :-0 I'm trying to local a part for my Piaggio Porter that is on a '57 plate with a 1300 engine. Thought I would try those online breakers but the first one asks make etc then when it comes to engine size the drop down box has 9 different options for a 1.3 :-0 Holy Cow !!!!! How am I to find out which one I have...I just get in it and drive :-0 it's 1300 & uses unleaded fuel. I know its not the 4x4 option. The log book just says 1300cc engine.
Anyone know where I would find out ?..
Anyone know where I would find out ?..
Penny PP- Centurion
- Posts : 113
Join date : 2014-08-31
Age : 55
Location : Maidstone, Kent
Re: Engine model
what are the options? I take it some options would be van, mpv, pickup, chassis cab?
FrontBackSide2Side- Cinquecento
- Posts : 584
Join date : 2013-10-04
Age : 41
Location : Kidderminster
Re: Engine model
Trying to post a scrren shot shiwing all the options without much luck :-0
Penny PP- Centurion
- Posts : 113
Join date : 2014-08-31
Age : 55
Location : Maidstone, Kent
Re: Engine model
It has a HC-E
Same in all of them from 1996 ish though to 2012 ish?
The only differences are the ignition system/coil packs, and the inlet manifold has an EGR on the post 2001 models.
You can use any age engine in any van, you just have to swap a few little bits about.
Same in all of them from 1996 ish though to 2012 ish?
The only differences are the ignition system/coil packs, and the inlet manifold has an EGR on the post 2001 models.
You can use any age engine in any van, you just have to swap a few little bits about.
Re: Engine model
The point is Penny - you leave us all in the dark - - what part(s) are you looking for??
Matt or I may be able to help you with what you what you need. Ask away.
Matt or I may be able to help you with what you what you need. Ask away.
Guest- Guest
Re: Engine model
Penny PP wrote:Trying to post a scrren shot shiwing all the options without much luck :-0
Or just post a link to the page you are struggling with.
Re: Engine model
When Penny called me last night she used her Christian name which kind of threw me but this morning have put two and two together and actually come up with four so excuse my post about which part you needed this morning. Plus when you called at 7pm I was still working on a job for a customer replacing a totally rotten floor in a Chalet. Have also had two days roofing work prior to that and was in agony with my Arthritis and this morning I feel like an old man. Shut up Waz. I don't need your reminders!!
Guest- Guest
Re: Engine model
http://www.micksgarage.com/quick-search/cars.aspx?vrm=SF57%20GBU Thanks HJ this is the link to the page. I put in the reg but it didn't want to know...said it only recognises uk plates :-0 funny that !!! So using the drop down boxes it gives 9 options for 1300 engine sizes :-0
Penny PP- Centurion
- Posts : 113
Join date : 2014-08-31
Age : 55
Location : Maidstone, Kent
Re: Engine model
Doesn't seem to be a very good site.
It did take my registration number but then asked whether it was a bus or a van. Grr, it is supposed to know!
Trying it for 1300 with no reg it gave 7 bodywork options and several engine options only one of which was 1.3 so on that basis it looks straightforward. Just choose body type with the correct registration / production date range.
It did take my registration number but then asked whether it was a bus or a van. Grr, it is supposed to know!
Trying it for 1300 with no reg it gave 7 bodywork options and several engine options only one of which was 1.3 so on that basis it looks straightforward. Just choose body type with the correct registration / production date range.
bushwhacker- Centurion
- Posts : 312
Join date : 2011-04-15
Re: Engine model
Either pick:-
1.3i 167v 1295cc if yours in the HC-E engine (check CC's on your v5c document)
or
1.3 (72hp 1308cc) if it is the non Daihatsu engined model - check cc's on v5c
1.3i 167v 1295cc if yours in the HC-E engine (check CC's on your v5c document)
or
1.3 (72hp 1308cc) if it is the non Daihatsu engined model - check cc's on v5c
Re: Engine model
I didn't know about the 1308cc engine - who made it? Wonder which one I have - my V5C says 1300cc but engine No. starts HC, so I guess it's the 1295
PFM- Jet Addict
- Posts : 1901
Join date : 2010-04-24
Age : 63
Location : East Sussex
Re: Engine model
My v5 says 1300 too. That was the first place I looked before posting on here. I shall try trawling the net more today to try to locate this part. Gotta be one out there somewhere
Penny PP- Centurion
- Posts : 113
Join date : 2014-08-31
Age : 55
Location : Maidstone, Kent
Re: Engine model
Please take a photo of what the engine looks like from under the passenger seat.
I'll tell you what you've got!
What part are you actually after?
I'll tell you what you've got!
What part are you actually after?
Re: Engine model
Nearside front hub assembly Matt. I haven't got one on the shelf and can't strip one off a van without causing myself logistical problems moving vans in the yard.
Guest- Guest
Similar topics
» Compatability between 1.3 efi engine 2000 model and a doner 2004 engine.
» Identify my Jet model
» 2000 model 1300 Hijet.
» what engine oil ???
» Here is a very nice late model example 22k miles - 2004
» Identify my Jet model
» 2000 model 1300 Hijet.
» what engine oil ???
» Here is a very nice late model example 22k miles - 2004
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|