engine will not turn over hmmmm
4 posters
Page 1 of 1
engine will not turn over hmmmm
ermm engine will not turn over ..
the starter motor is flicking in and out tho ..confused.com any thoughts ??
thinking of rotating the engine by hand /socket/spanner but its been so long since i had to do this i have forgot how advise if u can pls .. one of my worry's is is this engine seized
.. or large f***ing hammer lololol
the starter motor is flicking in and out tho ..confused.com any thoughts ??
thinking of rotating the engine by hand /socket/spanner but its been so long since i had to do this i have forgot how advise if u can pls .. one of my worry's is is this engine seized
.. or large f***ing hammer lololol
dec51- Clubman
- Posts : 21
Join date : 2014-08-04
Location : Lichfield
Re: engine will not turn over hmmmm
did you test it back on the truck?
d1noh- Centurion
- Posts : 460
Join date : 2011-03-13
Location : In the middle
Re: engine will not turn over hmmmm
classic sign of not enough power reaching the starter motor. Have you checked the 2 thinner wires coming from the positive battery terminal?
FrontBackSide2Side- Cinquecento
- Posts : 584
Join date : 2013-10-04
Age : 41
Location : Kidderminster
Re: engine will not turn over hmmmm
well the engine was seized. after spraying wd40 into and onto every cog plug hole and almost everything else the engine is now free,, i'll put the spark plugs back in tomorrow (if the weather is ok lol) and see if it will fire up .. if you hear a loud bang and crunch it might be this way lolol...
DEC
DEC
dec51- Clubman
- Posts : 21
Join date : 2014-08-04
Location : Lichfield
Re: engine will not turn over hmmmm
How long has it been stood?
How long have you owned it?
What happened on the last time it ran?
How long have you owned it?
What happened on the last time it ran?
Re: engine will not turn over hmmmm
hi HJ
its been standing in a garage for 10 months
i know the previous owner and bought it knowing there was a engine issue
basically it just stopped coming down a hill and could not get it restarted . ther was no loud engine noise no crunch it just stopped .and was put in a garage ,
the last time i know it was used was 10 months ago since then its sat in a garage
i have taken the sump off had a look up and it looks fine ,the cam belt is on .
2001 minibus it has a piaggio engine in ( no plugs in it at the moment)
DEC
its been standing in a garage for 10 months
i know the previous owner and bought it knowing there was a engine issue
basically it just stopped coming down a hill and could not get it restarted . ther was no loud engine noise no crunch it just stopped .and was put in a garage ,
the last time i know it was used was 10 months ago since then its sat in a garage
i have taken the sump off had a look up and it looks fine ,the cam belt is on .
2001 minibus it has a piaggio engine in ( no plugs in it at the moment)
DEC
dec51- Clubman
- Posts : 21
Join date : 2014-08-04
Location : Lichfield
Re: engine will not turn over hmmmm
Take the rocker cover off and see if the whole camshaft turns when you turn the crank pulley.
A fair few have snapped their cam shafts.
A fair few have snapped their cam shafts.
Re: engine will not turn over hmmmm
thanks for that HJ ,did have a look and all is fine .. think there is piston ring issue now as theirs a squeak think from a piston ring since i put some wd40 down the pots , grr think this might just end up as a strip down
dec51- Clubman
- Posts : 21
Join date : 2014-08-04
Location : Lichfield
Similar topics
» Engine runs(via bump start) but starter motor will not turn it over
» Compatability between 1.3 efi engine 2000 model and a doner 2004 engine.
» what engine oil ???
» Signal Turn Relay?
» What engine is that?
» Compatability between 1.3 efi engine 2000 model and a doner 2004 engine.
» what engine oil ???
» Signal Turn Relay?
» What engine is that?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|