hijet wheels
+2
Timosaki
Ryan 95
6 posters
Page 1 of 1
hijet wheels
so what wheels fit the hijet? mine has 12 inch rims but the tires are very expensive, can i fit either 13 or 14's? also whats the PCD?
not sure if i want to fit alloys, not big ones anyway!
not sure if i want to fit alloys, not big ones anyway!
Re: hijet wheels
4x110 which is rare... i think the center hole is 66,1mm. At least for the front. I have a pair of 13" alloys off a cuore (L201) which fit nicely
Timosaki- Clubman
- Posts : 41
Join date : 2014-07-11
Age : 44
Location : Papendrecht, the Netherlands
Re: hijet wheels
But use the search function, you will find plenty of info.
Timosaki- Clubman
- Posts : 41
Join date : 2014-07-11
Age : 44
Location : Papendrecht, the Netherlands
Re: hijet wheels
Cheers, will have a look at other Daihatsu cars, have a scrapyard near by so should find somthing
Re: hijet wheels
Ryan 95 wrote:Cheers, will have a look at other Daihatsu cars, have a scrapyard near by so should find somthing
Doubtful, only the early Cuore/Avantazzo wheels fit, other Daihatsus are 4x100 whereas the Jet is 4x110(which not much else is )
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 88
Location : Kilmarnock
Re: hijet wheels
Logi wrote:Ryan 95 wrote:Cheers, will have a look at other Daihatsu cars, have a scrapyard near by so should find somthing
Doubtful, only the early Cuore/Avantazzo wheels fit, other Daihatsus are 4x100 whereas the Jet is 4x110(which not much else is )
arse ahh well, it'd running 12" wheels, if i can get tires for them cheap then theirs no problem
Re: hijet wheels
Need to find some 13s that'll fit, as the 12" tires that are on it beed replaced
Gave a nice set if 14' alloys from a proton putra that might fit, will need to cheak the pcd
Gave a nice set if 14' alloys from a proton putra that might fit, will need to cheak the pcd
Re: hijet wheels
The early mazda rx-7 wheels fit too. Not sure if you have to have the spigots on the front turned down or not.
FrontBackSide2Side- Cinquecento
- Posts : 584
Join date : 2013-10-04
Age : 41
Location : Kidderminster
Re: hijet wheels
Logi wrote:Ryan 95 wrote:Cheers, will have a look at other Daihatsu cars, have a scrapyard near by so should find somthing
Doubtful, only the early Cuore/Avantazzo wheels fit, other Daihatsus are 4x100 whereas the Jet is 4x110(which not much else is )
move l601
charade g11
but like timosaki said you could just read it on this forum.
half of this forum is about overheating and the other half is about wheels
Guest- Guest
Re: hijet wheels
If you have a little search on a well known online auction site there was a set of 13" mazda RX7 alloys buy it now £100 the other day.
8bit-ash- Centurion
- Posts : 424
Join date : 2010-05-12
Re: hijet wheels
8bit-ash wrote:If you have a little search on a well known online auction site there was a set of 13" mazda RX7 alloys buy it now £100 the other day.
http://www.ebay.co.uk/itm/Mazda-RX7-1985-Wheels-Tyres-205x-60x-14/271554532368?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D23982%26meid%3D8822073772365621030%26pid%3D100011%26prg%3D9421%26rk%3D2%26rkt%3D10%26sd%3D281328729347
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 88
Location : Kilmarnock
Re: hijet wheels
cheers, had a look here but unfortunately the jet isnt listed http://whichwheelsfit.com/
can get 4 new 12" tires for £100 locally
can get 4 new 12" tires for £100 locally
Re: hijet wheels
Ryan 95 wrote:cheers, had a look here but unfortunately the jet isnt listed http://whichwheelsfit.com/
Or just look at this thread where all Hijet fitment wheels are already listed.....
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 88
Location : Kilmarnock
Re: hijet wheels
Logi wrote:Ryan 95 wrote:cheers, had a look here but unfortunately the jet isnt listed http://whichwheelsfit.com/
Or just look at this thread where all Hijet fitment wheels are already listed.....
err yes, just found that
Similar topics
» Wheels again - 14 inch Wheels
» Hijet site and old Hijet Accessories catalogues...
» Hijet Steel wheels and Tyres.....
» K & N Minator Alloy Wheels (correct fitment for Hijet)
» Alloy wheels again , Hijet friendly local machinist in the Midlands / Tamworth area required
» Hijet site and old Hijet Accessories catalogues...
» Hijet Steel wheels and Tyres.....
» K & N Minator Alloy Wheels (correct fitment for Hijet)
» Alloy wheels again , Hijet friendly local machinist in the Midlands / Tamworth area required
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|