HI-JET PROPSHAFT REPAIRS.
Page 1 of 1
HI-JET PROPSHAFT REPAIRS.
Well I spent an hour or two today looking for my Staked Propshaft Joint Replacement Tool. Bingo --- eventually. Its a bit dusty and rusty but will clean up well.
I am going to tomorrow see if my old supplier can get the joints for me. I will dismantle a prop tomorrow and measure the cross size and cup size and hopefully be able to get the joints. If so then we are up and running.
I will be able to offer a Staked Joint Replacement Service for one and all. Even if the yoke has been damaged a little by the cross going through the cup
I can weld the damage and then ream the cup hole out.
I will be a bit rusty myself at first and havent got scrap props to practise on but I should find a few in the scrap yards over here or ask on Wightbay.
I am going to tomorrow see if my old supplier can get the joints for me. I will dismantle a prop tomorrow and measure the cross size and cup size and hopefully be able to get the joints. If so then we are up and running.
I will be able to offer a Staked Joint Replacement Service for one and all. Even if the yoke has been damaged a little by the cross going through the cup
I can weld the damage and then ream the cup hole out.
I will be a bit rusty myself at first and havent got scrap props to practise on but I should find a few in the scrap yards over here or ask on Wightbay.
Guest- Guest
Similar topics
» HIJET PROPSHAFT RECALL
» 1300 EFI propshaft
» Looking for a Hijet 1.3 VAN propshaft
» 54 plate hijet pickup propshaft
» propshaft for diesel pickup
» 1300 EFI propshaft
» Looking for a Hijet 1.3 VAN propshaft
» 54 plate hijet pickup propshaft
» propshaft for diesel pickup
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|