Bleeding and Fitting New Caps
2 posters
Page 1 of 1
Bleeding and Fitting New Caps
Hello, Steve here!
I'm Planning on bleeding the cooling system and fitting new Radiator Caps to my 1.3 Hijet 2000 EFI. I've been trawling through the forum and I think I'm pretty clued up on topping up the cooling system(thanks!), however I have been having trouble finding advice/instructions on bleeding the 1.3.
Any advice would be welcome.
I'll post some pics tomorrow and let you know how it goes.
Many thanks,
Steve
I'm Planning on bleeding the cooling system and fitting new Radiator Caps to my 1.3 Hijet 2000 EFI. I've been trawling through the forum and I think I'm pretty clued up on topping up the cooling system(thanks!), however I have been having trouble finding advice/instructions on bleeding the 1.3.
Any advice would be welcome.
I'll post some pics tomorrow and let you know how it goes.
Many thanks,
Steve
stevesubscription- Clubman
- Posts : 29
Join date : 2017-08-12
Location : Scotland
Re: Bleeding and Fitting New Caps
Pretty much the same as the 1.0, but I'd recommend replacing the hose clips if still the old (not very) springy type with proper jubilee clips ( not pound shop shite ones... )
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 88
Location : Kilmarnock
Similar topics
» I am now stocking radiators, fuel caps, thermostats and radiator caps!
» Filling and bleeding (yet again)
» Who needs brakes?
» rad caps x 2
» 2 different rad caps
» Filling and bleeding (yet again)
» Who needs brakes?
» rad caps x 2
» 2 different rad caps
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|