993cc idle up VSV help needed
Page 1 of 1
993cc idle up VSV help needed
by neil54 Mon Aug 01, 2016 3:36 pm
A little help please.
The connector holding the wiring to the idle up VSV sensor is missing. the wires are just pushed on individually.
There is a chance that mine may be on the wrong connector. Would someone be able to have a look at theirs please.
The sensor is located next to the seat hinge, under the drivers seat. It has three tubes going to it and a wiring connector. The wires colours are white with a red stripe and blue with a red stripe.
Which is on top?
The connector holding the wiring to the idle up VSV sensor is missing. the wires are just pushed on individually.
There is a chance that mine may be on the wrong connector. Would someone be able to have a look at theirs please.
The sensor is located next to the seat hinge, under the drivers seat. It has three tubes going to it and a wiring connector. The wires colours are white with a red stripe and blue with a red stripe.
Which is on top?
neil54- Clubman
- Posts : 31
Join date : 2011-07-10
Re: 993cc idle up VSV help needed
by neil54 Sat Sep 24, 2016 1:52 pm
I have answered my own question.
The idle up vsv is a solenoid, which when operates opens a valve allowing gas to flow.
The polarity of the wires is unimportant.
Neil
The idle up vsv is a solenoid, which when operates opens a valve allowing gas to flow.
The polarity of the wires is unimportant.
Neil
neil54- Clubman
- Posts : 31
Join date : 2011-07-10
Similar topics» Camshaft 993cc 3 cylinder
» Nearside 993cc headlamp glass needed
» wanted Daihatsu Hijet 993CC petrol parts needed
» 993cc over heater
» 993cc Panel Van
» Nearside 993cc headlamp glass needed
» wanted Daihatsu Hijet 993CC petrol parts needed
» 993cc over heater
» 993cc Panel Van
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|