Help!!! Wiring ID and a chopped off hose

Hello chaps,

Help needed! The po has bodged the fan to be always on, using methods a teenage boy racer from the 90's would be proud off.

He's also chopped off a hose and shoved a bolt in to stop the end of it.

Can anyone help please guys, oh and I've set fire to dash, I need to rip it out and see if there are any more bodges behind the panels, grrrr!!!

<a href="https://s34.photobucket.com/user/stuntman1982/media/imagejpg1-2.jpg.html" target="_blank"><img src="https://2img.net/h/i34.photobucket.com/albums/d144/stuntman1982/imagejpg1-2.jpg" border="0" alt=" photo imagejpg1-2.jpg"/></a>
Should thus be plugged into anything?

The fan relay is supposed to live around there, they have a tendency to bugger up. The hose is your bleed valve.

I take it that it should not have a bolt in the end then, more of a valve. The multi plug that is there has 4 connections, I take it it should plug into something?

No valve as such, it's usually just a little rubber cap. Chances are it got lost as some point and replaced with that length of hose.

Is yours a dual fuel model or has it ever been?

I don't think so, there is no filler cap or tank fbsts.

I'm happy to bypass this entirely with a kenlow and a thermostat, but I'd like to get this identified first

It should look something like this:

You can pick them up on ebay for much cheapness. If you do replace that length of hose, don't chuck it out as it is halfway to being a pressure tester - all you need is a schrader valve (car tyre) and a compressor.

Cool, stupid request but you don't have a link to one eBay do you? Thanks chaps

http://www.ebay.co.uk/itm/190892513049?_trksid=p2059210.m2749.l2649&var=490179641625&ssPageName=STRK%3AMEBIDX%3AIT

Just need to choose your size and colour

Stuntman wrote:I'm happy to bypass this entirely with a kenlow and a thermostat, but I'd like to get this identified first

Logi wrote:The fan relay is supposed to live around there,

Ace thanks dudes

I just use a bit of pipe with a bolt in it like what you've got.

Except I cut the head off and make it look respectable.

Also all I'm going to say from previous experience with alot of hijets -

Dodgy fan wiring.
Altered Bleed bung.

99.9% needs a head job and other stuff.