Nuts and Bolts
3 posters
Page 1 of 1
Nuts and Bolts
I want to replace the nuts and bolts that secure my front wheel hubs to the suspension struts. Thinking they were just plain 12mm bolts all be it with and odd size head, off I went to my local supplier of all things with threads on to be told "sorry mate never seen anything like that before".
Anybody got a clue as to what type of nuts and bolts Daihatsu use? Metric, metric fine, UNF etc are all no good.
Anybody got a clue as to what type of nuts and bolts Daihatsu use? Metric, metric fine, UNF etc are all no good.
wrightgeordie- Chatterbox
- Posts : 76
Join date : 2015-12-27
Age : 70
Location : County Armagh
Re: Nuts and Bolts
Metric it is, only an other than normal size, will check for you tomorrow, had some enginebolts supllied last week, and they were metric but not standard.
jeremiah1992- Clubman
- Posts : 42
Join date : 2015-09-16
Re: Nuts and Bolts
If it helps I measured the bolts across the shoulders (the unthreaded bit) and they are each 11.88mm in diameter, an unusual size. Why not 12mm as I'd expected, cant think of any reason why they'd use a special size.
Think Ill just ream the holes out and fit a normal 12mm bolt.
Think Ill just ream the holes out and fit a normal 12mm bolt.
wrightgeordie- Chatterbox
- Posts : 76
Join date : 2015-12-27
Age : 70
Location : County Armagh
Re: Nuts and Bolts
They are a Metric 8mm thread with 12mm or 13mm spanner size head depending on who has been let loose on your Hi-Jet before. Nothing special at all about them at all.
Guest- Guest
Similar topics
» Head Bolts
» Wobble nuts yes/no??? any one used them
» Anyone fitted peugeot wheels of around 14'' with wobble bolts?
» Locking wheel nuts
» How to centre rear wheels without the spigot? Wobbly bolts..
» Wobble nuts yes/no??? any one used them
» Anyone fitted peugeot wheels of around 14'' with wobble bolts?
» Locking wheel nuts
» How to centre rear wheels without the spigot? Wobbly bolts..
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|