Dinky Doo
3 posters
Page 1 of 1
Dinky Doo
Still looking for a set of minilites or any alloys that will fit to finish off my Doo. Heading up to Glencoe with her at the end of September so should be fun!! Back was a bit messy but I had just finished hill walking with the dog.
][img][/img]
[img][/img]
[img][/img]
[img][/img]
][img][/img]
[img][/img]
[img][/img]
[img][/img]
dee26173- Chatterbox
- Posts : 61
Join date : 2010-07-02
Location : Aberdeen
Re: Dinky Doo
That looks great.
You've obviously put a lot of time & effort into it.
You've obviously put a lot of time & effort into it.
kentgpz11- Centurion
- Posts : 295
Join date : 2010-02-11
Age : 56
Location : Stoke-On-Trent
Re: Dinky Doo
Its coming along nicely. I have now acquired a set of 13'' Superlites but need to get longer nuts before they can be put on.
I also picked this beastie up at the car boot today.
[img][/img]
I also picked this beastie up at the car boot today.
[img][/img]
dee26173- Chatterbox
- Posts : 61
Join date : 2010-07-02
Location : Aberdeen
Re: Dinky Doo
That should give it a bit more oomph.
I've got one similar to that for our van, but the adaptor needs modifying to fit.
I've got one similar to that for our van, but the adaptor needs modifying to fit.
kentgpz11- Centurion
- Posts : 295
Join date : 2010-02-11
Age : 56
Location : Stoke-On-Trent
Re: Dinky Doo
If its any use to anyone, I used a short (6 inch) piece of metal pipe to join my filter to the stock rubber tube.
Its a snug fit in the rubber tube, and also on the smallest adaptor for the air filter I got (60mm I think it is)...
Tighten a jubilee clip down on each side and its fine
Have you got that filter fitted properly Dee?
It looks like you havent pushed the rubber adaptor onto the plastic joiner far enough...
Its a snug fit in the rubber tube, and also on the smallest adaptor for the air filter I got (60mm I think it is)...
Tighten a jubilee clip down on each side and its fine
Have you got that filter fitted properly Dee?
It looks like you havent pushed the rubber adaptor onto the plastic joiner far enough...
difflock123- Centurion
- Posts : 301
Join date : 2010-06-11
Re: Dinky Doo
Difflock I'll have a proper look at the weekend. I don't think it does go any further up and certainly looking at the pictured instructions it looks as if it don't.
dee26173- Chatterbox
- Posts : 61
Join date : 2010-07-02
Location : Aberdeen
Re: Dinky Doo
Thats fair enough
Mine is snug, just thought I would mention it as I wouldnt want it too fall off
Mine is snug, just thought I would mention it as I wouldnt want it too fall off
difflock123- Centurion
- Posts : 301
Join date : 2010-06-11
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|