Wheel stuck on!

I would have posted this as a follow on to yesterdays discussion on tiny wheels. tires etc......except I can't find that string of posts!

Anyway, does anybody have any suggestions as to how I can get a wheel off that is stuck on? I've whacked it with a large hammer; not budging. Whack it harder?

I had the same problem last year,got to gararge to shift
it,on a ramp,but a strong bit of wood across the rim clouting and turning the wheel abit after each couple of
wacks!! good luck

I usually use a Sledge Hammer hitting the tyre on the inside of the wheel with the flat side of the head of the hammer turning the wheel a little bit each time. Always works for me.

Before putting a wheel on I always grease the stub of the disc and the centre hole of the wheel. If it is a steel wheel sandpaper the hole edges to get any rust off or if an Alloy same again to get the corrosion off before greasing it.

As Woody says, if at first you don't succeed, use a bigger hammer
DON'T hit the wheel.

I've just tried loosening off bolts and driving, hard breaking etc. No luck whatsoever. Have whacked it hard lots of times with a sledge hammer.

Logi, it's going to be your way next... BIGGER HAMMER!

Nothing's ever straightforward is it?!

If suspended securely I sometimes lie on my back and stamp alternate edges of the tyre, works for me

I put big block of wood on the rim, then batter it with a lump hammer.

Had a customer bring a Cortina GT in, we tried to remove rear wheels as part of service no  luck block of wood, oil, heat, Bigger hammer, Sledge Hammer more heat more hammer still no go had to cut them off in the end what had happened was BIG bloke + wheel nuts TIGHT, TIGHTER, Now check them again
The wheel centre return was acting like a huge spire clip never seen it before or after