Micro Van Owners Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Compatability between 1.3 efi engine 2000 model and a doner 2004 engine.

3 posters

Go down

Compatability between 1.3 efi engine 2000 model and a doner 2004 engine. Empty Compatability between 1.3 efi engine 2000 model and a doner 2004 engine.

Post by Celtic Sun May 15, 2016 1:55 pm

Can anyone help me please? I have a "X" reg 1.3 hi jet efi with a seized engine. I have aquired another engine from a 2004/5 model hijet/piaggio. Are there any changes between the engines which I should be looking out for i.e sensors added, additional air pipes etc. I am grateful for any help you guys can supply.

Celtic
New Member
New Member

Posts : 2
Join date : 2015-12-01

Back to top Go down

Compatability between 1.3 efi engine 2000 model and a doner 2004 engine. Empty Re: Compatability between 1.3 efi engine 2000 model and a doner 2004 engine.

Post by HighlyJetted Sun May 15, 2016 8:22 pm

The post 2004 will have an EGR valve. with a slightly different inlet manifold.

Also the injectors are different.

Keep your original inlet manifold and everything is cool.
HighlyJetted
HighlyJetted
Hijet Overdose

Posts : 5596
Join date : 2009-10-06
Age : 41
Location : Cheshire

http://www.daihatsuhijet.co.uk

Back to top Go down

Compatability between 1.3 efi engine 2000 model and a doner 2004 engine. Empty Re: Compatability between 1.3 efi engine 2000 model and a doner 2004 engine.

Post by Logi Sun May 15, 2016 8:40 pm

HighlyJetted wrote: everything is cool.

The holy grail for Hijetters lol!
Logi
Logi
Jet Warrior

Posts : 3662
Join date : 2011-04-07
Age : 89
Location : Kilmarnock

Back to top Go down

Compatability between 1.3 efi engine 2000 model and a doner 2004 engine. Empty Re: Compatability between 1.3 efi engine 2000 model and a doner 2004 engine.

Post by Celtic Sun May 15, 2016 9:45 pm

Thanks Highly Jetted. I did notice the exorbitant amount of vaccuum pipes, diaphrams and additional electronics. Smile Also the lambda has a different connection (4 pin instead of my old 2 pin) so swapped it over aswell Smile Now just gotta remember where all these pipes go LOL!!!

Celtic
New Member
New Member

Posts : 2
Join date : 2015-12-01

Back to top Go down

Compatability between 1.3 efi engine 2000 model and a doner 2004 engine. Empty Re: Compatability between 1.3 efi engine 2000 model and a doner 2004 engine.

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum