I know it's been done to death - wheels
3 posters
Page 1 of 1
I know it's been done to death - wheels
Hello guys. Just a really quick question. I have been using search I promise
I'm after some alloys for my new mpv/ works truck. I have read that wobbly bolts and washers will allow a more common cps to be fitted. Is this true? And if so can you post a link to the right bolts on eBay please? I know it's a cheeky ask but I really want to get this project done in less that two weeks
Regards
Andi
I'm after some alloys for my new mpv/ works truck. I have read that wobbly bolts and washers will allow a more common cps to be fitted. Is this true? And if so can you post a link to the right bolts on eBay please? I know it's a cheeky ask but I really want to get this project done in less that two weeks
Regards
Andi
Stuntman- Clubman
- Posts : 35
Join date : 2014-08-11
Re: I know it's been done to death - wheels
It's kinda true but not ideal.
As there is no spigot on the back there is a bit of a safety issue with using wobble nuts, also some wheels will require longer studs on the rears and depending on the centre bore of the new wheels you will need to either modify the spigots on the front hub, have the centre bore of the wheel bored out or use spigot rings. Usually its a case of modifying the hubs/ boring the wheels out.
As there is no spigot on the back there is a bit of a safety issue with using wobble nuts, also some wheels will require longer studs on the rears and depending on the centre bore of the new wheels you will need to either modify the spigots on the front hub, have the centre bore of the wheel bored out or use spigot rings. Usually its a case of modifying the hubs/ boring the wheels out.
FrontBackSide2Side- Cinquecento
- Posts : 584
Join date : 2013-10-04
Age : 41
Location : Kidderminster
Re: I know it's been done to death - wheels
Cool. Is there an idiots guide to wheels on the forum?
Stuntman- Clubman
- Posts : 35
Join date : 2014-08-11
Re: I know it's been done to death - wheels
not that i've seen. Plenty of threads on here but all in different places lol
FrontBackSide2Side- Cinquecento
- Posts : 584
Join date : 2013-10-04
Age : 41
Location : Kidderminster
Re: I know it's been done to death - wheels
Had both front hubs turned down, fitted 165/65/13 with a stretch
Stuntman- Clubman
- Posts : 35
Join date : 2014-08-11
jamesgates1000- Chatterbox
- Posts : 68
Join date : 2014-02-13
Location : Bristol
Similar topics
» Wheels again - 14 inch Wheels
» HOT WHEELS
» EFI 1.3 wheels
» wheels and tyres FREEEEEEEEEEE
» Wheels - Can we fit.......
» HOT WHEELS
» EFI 1.3 wheels
» wheels and tyres FREEEEEEEEEEE
» Wheels - Can we fit.......
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|