diagnostic connector location

Hello everybody
Can someone tell me where is the diagnostic connector of daihatsu hijet cargo 659cc,065L made in 2001? How many pins does it have and what colours are T and E cables?

Might be obd2 under the dash on the drivers side.

I found mine behind the fuse box, left hand side of steering column, tucked behind the carpet.
It is only has four connectors.
There is an article concerning the flashcodes and I think from memory the T wire is brown.

Thank you very much my friend, I work far from my house, so tomorrow I will look for it and then let you know wheither I found it or not. But in the midletime, can you tell me if it is alone or sticked with another plug and what colour is it.

Yours being a 2001 Cargo 660 EF-SE engine model s200 or s220 will most likely be like this http://www.daihatsuhijet.co.uk/s200-extol-atrai-cargo-hijet-engine-diagnostic-mode-and-error-codes/

Hello Highly Jetted
Mine is a 659CC EF-SE engine model GD-S200V 0.65l made in 2001 in Japan. It is slightly different with what i saw to www.daihatsuhijet.co.uk/s200-extol-atrai-cargo-hijet-engine-diagnostic-mode-and-error-codes/

Can you post any pictures of what you've got?

The DLC of my car is a black 16 pins one, using only 8 wires. Here is the connection of wires:
1st pin (green-black)--------------54
2nd pin not used
3th pin (black)---------------------6
4th black-white)-------------------11
5th not used
6th (white-violet) -----------------31
7th (yellow)------------------------12
8th not used
9th (red-yellow)--------------------29
10th not used
11th not used
12th not used
13th (violet) does not go to the ecu
14th not used
15th not used
16th black-red--------------------11
As you it is not the same. Example:according to daihatsu hijet .co.uk, 16th pin is for the battery power but for my DLC is ground.

What happens if you plug an OBD2 code reader into it?

I have not it, and i would like to know first of all what kind of OBD is it, OBD, OBD1 or OBD2.

OBD2 if it looks like this:-

Yes, it does. But the problem is in the connexion from dlc pins to ecu pins. It is not the same with the one i saw to www.daihatsuhijet.co.uk, as i wrote to you first.

Hi all
I have 1998 piaggio porter micro van with a 998cc engine, can someone tell me where the diagnostic connection is pls, if it has one because I can not find it

Thanks Alex