1300 camshaft
2 posters
Page 1 of 1
1300 camshaft
has any one got a 1300 camshaft as the lobes on mine have completley worn away thank you
davidc- Member
- Posts : 19
Join date : 2011-06-02
Re: 1300 camshaft
What are the journals like on it?
If its been that dry that the lobes have worn, you will have more problems realistically.
I do have a complete cylinder head ready to go on the shelf for just £85 plus I can post it for about £8 - which has cams lifters valves the lot.
If its been that dry that the lobes have worn, you will have more problems realistically.
I do have a complete cylinder head ready to go on the shelf for just £85 plus I can post it for about £8 - which has cams lifters valves the lot.
Re: 1300 camshaft
the journals are in really good condition hardly any wear i was thinking is was down to a bad cast cam when made i had one go like this on another car
davidc- Member
- Posts : 19
Join date : 2011-06-02
Re: 1300 camshaft
I personally won't split a cam from a head, they go as a complete top end.
What about the rockers/lifters - if the cam has worn so much the faces of the rockers/lifter must have taken some of the pain.
What about the rockers/lifters - if the cam has worn so much the faces of the rockers/lifter must have taken some of the pain.
Re: 1300 camshaft
I have a cam if you are still looking for one and the set of matching followers which I will number up so they end up with the original followers on the right lobes. Woody. 07970 391876.
Guest- Guest
Similar topics
» 1300 camshaft
» 1.0 hijet camshaft, tappets or engine
» Camshaft Sensor Problem --It isn't.
» Camshaft 993cc 3 cylinder
» Engine Wanted
» 1.0 hijet camshaft, tappets or engine
» Camshaft Sensor Problem --It isn't.
» Camshaft 993cc 3 cylinder
» Engine Wanted
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|