starting to look again....
+2
PFM
leopard_pagan
6 posters
Page 1 of 2
Page 1 of 2 • 1, 2
starting to look again....
I currently drive a Renult MPV.. nice to have the 1.6 grunt, but i miss the ol sooty van.
want to put a new MOT on the Renult in April then sell. probable be looking for a 1.3/1.2 diesel van.
want to put a new MOT on the Renult in April then sell. probable be looking for a 1.3/1.2 diesel van.
leopard_pagan- Admin
- Posts : 1112
Join date : 2009-09-21
Re: starting to look again....
Well done - we all knew you wouldn't be able to keep away from the hassles joys of owning a Hijet!
PFM- Jet Addict
- Posts : 1915
Join date : 2010-04-24
Age : 64
Location : East Sussex
Re: starting to look again....
PFM wrote:Well done - we all knew you wouldn't be able to keep away from thehasslesjoys of owning a Hijet!
x2
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 89
Location : Kilmarnock
Re: starting to look again....
Miss the fun in diving them & I'm now driving 50 miles a day commuting & it's costing a fair bit in fuel!
leopard_pagan- Admin
- Posts : 1112
Join date : 2009-09-21
Re: starting to look again....
Buy a 1.3 petrol, you'll regret owning an Italian Lomardini diesel engine
Re: starting to look again....
Diesel Hijet. Forget it. Gutless, thirsty, noisy, rattly rubbish.
Buy a 1300 16v petrol/lpg. Very cheap to run, plenty of poke, plenty of parts, fun to throw about too. Diesel--- I think not.
Buy a 1300 16v petrol/lpg. Very cheap to run, plenty of poke, plenty of parts, fun to throw about too. Diesel--- I think not.
Guest- Guest
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 89
Location : Kilmarnock
Re: starting to look again....
Hhhmmml would be nice if you could pick it up for that kind of money I must
say. I would buy 2or 3 for stock at that price Logi. Dream on Stuart. . Picking up an
I Pad Tuesday so I can keep in touch till my Laptop has been refurbed at PC World in two
weeks time.
Its damned awkward on my phones with my Bear Traps for hands
Welcome back HJ . Hope you had a good rest and are not in need of any new body
parts or need a major overhaul or MoT.
say. I would buy 2or 3 for stock at that price Logi. Dream on Stuart. . Picking up an
I Pad Tuesday so I can keep in touch till my Laptop has been refurbed at PC World in two
weeks time.
Its damned awkward on my phones with my Bear Traps for hands
Welcome back HJ . Hope you had a good rest and are not in need of any new body
parts or need a major overhaul or MoT.
Guest- Guest
Re: starting to look again....
will be a couple of months before i can seriously start looking again..
need to MOT/Sell the Renault MPV i currently have as well as some money in from PPI claim/s will see me be able to get one then.
thought diesel was more economical?
i have no idea which petrol station near me even sells LPG..?
is there a "checker' i can use?
need to MOT/Sell the Renault MPV i currently have as well as some money in from PPI claim/s will see me be able to get one then.
thought diesel was more economical?
i have no idea which petrol station near me even sells LPG..?
is there a "checker' i can use?
leopard_pagan- Admin
- Posts : 1112
Join date : 2009-09-21
Re: starting to look again....
Sadly Hijet diesels are notoriously bad. Had no end of problems with them in my two years as Service and Warranties Manager at Romahome. please do NOT EVEN CONSIDER ONE.
The 1300 16valves are brilliant. The overheating problems in my experience start with the two filler caps not being checked for cracked or leaking seal often enough. I replace the two caps virtually every 6 months . What usually happens is that they leak - lose water and then overheat.
The owner or more often a garage doesnt bleed them properly by filling the system through the Radiator filler using a mains hosepipe and by taking off the engine bay fillder cap off untill the water and air bleed out for a short while then contiinue fillig the radiator under pressure till the heater radiator ( Matrix ) is full up and FREE OF AIR BUBBLES coming out of the little bleed hose which comes back onto the radiator filler cap neck and whilst still training the hose on the fillefr neck pop the cap back on so no air gets back into the system.
Regular checking and replacing of te 2 filler caps and proper bleeding of the system and I have in 9 years never replaced a head gasket. and I have owned a few Hijets in my time. .
Regards Stuart. Woody.
The 1300 16valves are brilliant. The overheating problems in my experience start with the two filler caps not being checked for cracked or leaking seal often enough. I replace the two caps virtually every 6 months . What usually happens is that they leak - lose water and then overheat.
The owner or more often a garage doesnt bleed them properly by filling the system through the Radiator filler using a mains hosepipe and by taking off the engine bay fillder cap off untill the water and air bleed out for a short while then contiinue fillig the radiator under pressure till the heater radiator ( Matrix ) is full up and FREE OF AIR BUBBLES coming out of the little bleed hose which comes back onto the radiator filler cap neck and whilst still training the hose on the fillefr neck pop the cap back on so no air gets back into the system.
Regular checking and replacing of te 2 filler caps and proper bleeding of the system and I have in 9 years never replaced a head gasket. and I have owned a few Hijets in my time. .
Regards Stuart. Woody.
Guest- Guest
Re: starting to look again....
this would be my 2nd one if.. ok WHEN i get it.
last one was a 998cc mpv had for 3/4 years.. & did have to get the head skimmed while i had it.
lol at filling the system with hose pipe.. i did mine thru the rad at the front.. stuck the pipe in.. left it & got covered in water when it pressurised up & spat it out while i was stood in front of it! lesson learnt.. stand to the side next time!
removed those silly orange knobs holding front panel on & used sticky back velcro.. worked a treat.
last one was a 998cc mpv had for 3/4 years.. & did have to get the head skimmed while i had it.
lol at filling the system with hose pipe.. i did mine thru the rad at the front.. stuck the pipe in.. left it & got covered in water when it pressurised up & spat it out while i was stood in front of it! lesson learnt.. stand to the side next time!
removed those silly orange knobs holding front panel on & used sticky back velcro.. worked a treat.
leopard_pagan- Admin
- Posts : 1112
Join date : 2009-09-21
Re: starting to look again....
I made an adaptor up to go in the end of the hosepipe the same diameter as the radcap seal and glued the seal to it and enlarged the hole in the middle of it.
"Simples".
That way you dont look as though you have been caught short and loose all your street cred.....
Just keep the water tap turned on low and watch for the bubbles and water come out of the little pipe attached to radcap housing. Easy-peasy as Logi would say..
Good luck with your search for a good one when you are ready. There are always bargains out there.
"Simples".
That way you dont look as though you have been caught short and loose all your street cred.....
Just keep the water tap turned on low and watch for the bubbles and water come out of the little pipe attached to radcap housing. Easy-peasy as Logi would say..
Good luck with your search for a good one when you are ready. There are always bargains out there.
Guest- Guest
Re: starting to look again....
And plenty of rough over priced dogs.
But you know what to look for I'm sure LP.
I might sell my white one as I have a craving for a little sports hatch back
Can I do it though?
But you know what to look for I'm sure LP.
I might sell my white one as I have a craving for a little sports hatch back
Can I do it though?
Re: starting to look again....
All well & good using a hose to fill it, but up here we dont havd antifreeze on tap?
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 89
Location : Kilmarnock
Re: starting to look again....
Not even in " The Scheme"
http://m.youtube.com/#/watch?v=Xan2xU-ZFic&desktop_uri=%2Fwatch%3Fv%3DXan2xU-ZFic&gl=GB
http://m.youtube.com/#/watch?v=Xan2xU-ZFic&desktop_uri=%2Fwatch%3Fv%3DXan2xU-ZFic&gl=GB
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 89
Location : Kilmarnock
Re: starting to look again....
HighlyJetted wrote:I didn't understand a word of that.
Numpty eh Logi
waz- Cinquecento
- Posts : 748
Join date : 2011-07-26
Location : Maidstone Kent
Re: starting to look again....
Makes.me proud tae be fae Killie
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 89
Location : Kilmarnock
Re: starting to look again....
Logi wrote:Makes.me proud tae be fae Killie
Am fae Lanark masel
waz- Cinquecento
- Posts : 748
Join date : 2011-07-26
Location : Maidstone Kent
Re: starting to look again....
Reading these amusing quips is better than watching telly anyday-- not that I get the time anyway ( except tor NCIS )
Guest- Guest
Re: starting to look again....
woody50 wrote:Reading these amusing quips is better than watching telly anyday-- not that I get the time anyway ( except tor NCIS )
You should be out there fixing your starting problem, not sitting playing with you computer
waz- Cinquecento
- Posts : 748
Join date : 2011-07-26
Location : Maidstone Kent
Re: starting to look again....
What computer? Damn thing is in PC World having an engine transplant .
Its my Nokia
which is slowing me up.
Cant find any enthusiasm to work on the dead Hijet in this snow. My workshop
is five miles from home and and has a Romahome transplant I am trying to get done, in it and 10 vehicles in the compound I am much happier earning money in a nice warm customers holiday home putting in a complete new bathroom.
YOU KNOW IT MAKES SENSE !!
Anyway I need the practice at my non existant computer skills poor old fart.!!
Its my Nokia
which is slowing me up.
Cant find any enthusiasm to work on the dead Hijet in this snow. My workshop
is five miles from home and and has a Romahome transplant I am trying to get done, in it and 10 vehicles in the compound I am much happier earning money in a nice warm customers holiday home putting in a complete new bathroom.
YOU KNOW IT MAKES SENSE !!
Anyway I need the practice at my non existant computer skills poor old fart.!!
Guest- Guest
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 89
Location : Kilmarnock
Re: starting to look again....
Saw that earlier.. Seen the amount of rust spots when you click on the squished image?
leopard_pagan- Admin
- Posts : 1112
Join date : 2009-09-21
Re: starting to look again....
But I thought youd like spots...........
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 89
Location : Kilmarnock
Re: starting to look again....
Thats me, subtle.
Subtle as a brick in the face
Subtle as a brick in the face
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 89
Location : Kilmarnock
Re: starting to look again....
Yay another KKJ Hammersmith and Fulham Council van.
8bit-ash- Centurion
- Posts : 424
Join date : 2010-05-12
Page 1 of 2 • 1, 2
Similar topics
» Starting on LPG
» help starting please
» Intermittent non-starting
» All good.....now not starting
» Starting problem
» help starting please
» Intermittent non-starting
» All good.....now not starting
» Starting problem
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum