Disc Pad Retaining Pins
2 posters
Page 1 of 1
Disc Pad Retaining Pins
Hi all, gone to put some new brake pads on the front and cannot get the two pins that locate and retain the pads to budge. Anybody had similar issue or got a tip? Many thanks.
Moley_t- Member
- Posts : 9
Join date : 2017-05-21
Location : Suffolk
Re: Disc Pad Retaining Pins
Yes, they can be b***ers. Persistence and plenty of WD40. They will move eventually. When you get them out a good clean and plenty of silicone grease on rebuild. I've searched for new pins but nobody sells them, other than Piaggio in Italy.
Similar topics
» Disc Pad Retaining Pins
» Hijet Brake Pins
» 4x4 front brake disc replacment
» wanted brake pad springs /fitting kit for drivers side 96 se
» Fitting Kit (Clips/Pins for front brake pads)
» Hijet Brake Pins
» 4x4 front brake disc replacment
» wanted brake pad springs /fitting kit for drivers side 96 se
» Fitting Kit (Clips/Pins for front brake pads)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|