Anyone Want To Slip Me Their Shaft?
4 posters
Page 1 of 1
Anyone Want To Slip Me Their Shaft?
Looks like i have found the problem with my back end, propshaft uj's are seized solid, just looking to see how much one will cost = replacing the uj's
(sadly they are staked so i can't do it myself )
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 88
Location : Kilmarnock
Re: Anyone Want To Slip Me Their Shaft?
is yours a 1.3? & did you ever call Daihatsu & check if your vans prop-shaft was replaced under recall?........ they will need the VIN.
leopard_pagan- Admin
- Posts : 1112
Join date : 2009-09-21
Re: Anyone Want To Slip Me Their Shaft?
Errr why not put a drill through the stakes and then spot them with the welder to lock the new ones in.Logi wrote: replacing the uj's
(sadly they are staked so i can't do it myself )
Re: Anyone Want To Slip Me Their Shaft?
If I had a shaft to slip you I would sort you out without a doubt. But I only have 1 spare shaft and its not long enough for your requirements.
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 88
Location : Kilmarnock
Re: Anyone Want To Slip Me Their Shaft?
I would contact Ardneil Garage @ Troon near you http://www.ardneil.co.uk/contact_us.html
As you really might get a new shaft including fitting done on a recall:-
As you really might get a new shaft including fitting done on a recall:-
Re: Anyone Want To Slip Me Their Shaft?
Tis my 1st port of call Monday morning
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 88
Location : Kilmarnock
Re: Anyone Want To Slip Me Their Shaft?
Shafted all right, doesnt come up on the system
Possibly cos it was a RN vehicle when new?
Bassa
So, anyone wanna shaft me?
Possibly cos it was a RN vehicle when new?
Bassa
So, anyone wanna shaft me?
Logi- Jet Warrior
- Posts : 3662
Join date : 2011-04-07
Age : 88
Location : Kilmarnock
Similar topics
» clutch slip
» 1.3 16v EFI Cam Shaft Possibly Required.
» prop shaft
» Need Prop shaft!!!!
» Wanted half shaft
» 1.3 16v EFI Cam Shaft Possibly Required.
» prop shaft
» Need Prop shaft!!!!
» Wanted half shaft
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|